14_
setting up
Reassembling the freezer door
Pull out the rails to the full length on each sidle
1.
of the cabinet evenly.
Hang the freezer door front onto open slot on
2.
the sides.
With the 10mm wrench, reattach 4 bolts to
3.
connect the rail with the door.
With the drawer pulled out fully, insert the
4.
drawer box into the rail system.
DA68-02657A.indb 14
2012.7.3 10:53:28 AM
Be careful not to scratch or dent the sliding
Make sure that you mount the freezer
basket in the right position when removing
/ installing the freezer door. Failing to do
so may result in the door not opening or
closing properly.
CAUTION
CAUTION
Insert and tighten the ground screw into the left
8.
and right upper hinges with a philips
screw).
Connect the electronic wire on the top of the
9.
refrigerator.
ground wire
Slot
