Samsung RF18 Series, Service Manual

Page: 17 / 67

17
3. DISASSEMBLY AND REASSEMBLY
• Unplug the refrigerator before cleaning and making repairs.
• Do not dissemble or repair the refrigerator by yourself.
- It may cause risk of causing a fire, malfunction and/or personal injury.
• Remove any foreign matter or dust from the power plug pins.
- Otherwise there is a risk of fire.
• Do not use a cord that shows cracks or abrasion damage along its length or at either end.
• Do not plug several appliances into the same multiple power board. The refrigerator should always be
plugged into its own individual electrical which has a voltage rating that matched the rating plate.
- This provides the best performance and also prevents overloading house wiring circuits, which could
cause a fire hazard from overheated wires.
• Do not install the refrigerator in a damp place or place where it may come in contact with water.
- Deteriorated insulation of electrical parts may cause an electric shock or fire.
• The refrigerator must be grounded.
- You must ground the refrigerator to prevent any power leakages or electric shocks caused by current
leakage from the refrigerator.
• Do not put bottles or glass containers in the freezer.
- When the contents freeze, the glass may break and cause personal injury.
• Do not store volatile or flammable substances in the refrigerator.
- The storage of benzene, thinner, alcohol, ether, LP gas and other such products may cause
explosions.
- Required Tools
3-1) PRECAUTION
IMAGE ITEM USE
Phillips Head Driver
Use for inserting and
removing screws
Flat Head Driver
Use for assembling and disassembling
of HomeBar, Dispenser, Deli Box, Main
PBA etc..
Hex Wrench Ø2mm Use for Hinge assembly/disassembly
Socket Wrench Ø10mm
Use for Door Hinge
assembly/disassembly