31
Call <Name or #>
Call Digit Dialing
Digit Dial allows you to dial any phone number by simply
speaking the digits into the phone. No training is necessary, and
Digit Dial is programmed to understand natural speech.
1.
From the home screen, press the
Voice Commands
key
.
2.
After a brief pause, a list of optional commands appears in
the display and the audio prompt "Please say a command"
plays through the earpiece or speakerphone.
3.
Say “Call” at a distance of 3-12 inches from the phone in a
natural voice.
4.
“Please say the name, number, voice mail or last number”
plays through the earpiece or speakerphone.
5.
Say the area code and number that you want to dial into
the microphone, clearly and naturally.
6.
The number that you said is repeated through the speaker
and your phone dials the number.
7.
If Voice Commands is not sure of the number that you said,
a list of possible matches appears in the display.
8.
You’re asked to confirm the correct number as Voice
Commands displays the results.
•
Say “
Yes
” to confirm the number.
•
Say “
No
” to reject the number.
•
Say “
Exit
” to exit the Voice Command.
•
Say “
Repeat
” to have the selected number read one more time.
Call Name Dialing
To use Name Dial, you’ll need to have entries stored in your
Contacts list. See page 47 for information on creating a Contacts
list.
1.
From the home screen, press the
Voice Commands
key
.
2.
After a brief pause, a list of optional commands appears in
the display and the audio prompt “Please say a command”
plays through the earpiece or speakerphone.
3.
Say “Call” at a distance of 3-12 inches from the phone in a
natural voice.
4.
“Please say the name, number, voice mail or last number”
plays through the earpiece or speakerphone.
5.
To use Name Dialing, say the name of the contact that you
want to dial.
u810.book Page 31 Friday, May 1, 2009 12:03 PM
