Samsung Real Time SHR-2041 User Manual Download Page 148

Page: 148 / 211

English

SHR-2040/2041/2042 USER’S MANUAL

9-29

●

Next Button

- Changes the channel as the Next button does in the monitoring mode.

●

Reload Button

- Updates the record time information in the calendar window and time line.

●

Local Mode
- Plays *.dvr file saved in the directory of your PC by the Record function.

- You can search and play only one channel.
- You are allowed to access it regardless of connecting with SHR-2040/2041/2042.
- Other functions than the calendar display function are as same as those of

the remote mode.

- The time information of LocalFile will be displayed at the first channel position in

the time line together with the file name.

: Selects a file to be played in the file selection window and changes

to the local mode.

Note

During the video playback(Play/RevPlay/FF/FB), the channel change is not available.

Note

Only the *.dvr file saved by the audio activation can be played in the local mode.

SHR-2040/2041/2042-ENG-2 10/19/07 10:37 AM Page 9-29

Summary of Contents for Real Time SHR-2041




















































































































































































































Search results

Summary of Contents for Real Time SHR-2041

Reviews:

Related manuals for Real Time SHR-2041

Brands by name

Popular brands

Samsung Real Time SHR-2041, User Manual

Search results

Summary of Contents for Real Time SHR-2041

Reviews:

Related manuals for Real Time SHR-2041

Brands by name

Popular brands