English
43
Maint
enanc
e
2
1
3
RB37
Glass door models
• Open the fridge door, and slightly lift
up the left side of the
wire cover (1)
to
remove. Then, remove the
space cover
(2)
then the
dongle PBA connector (3)
.
NOTE
Keep the
space cover
in a safe place. It is
necessary when you return the door to the
initial position (before reversing the door).
4
4.
Remove the
top frame cover (4)
from
the bottom left then the top side. Then,
pull out to the front.
4
• For models that have the display panel
on the top of the fridge, locate the
service holes on the
top frame cover (4)
.
- Insert a flat-head screwdriver into
the left hole and release the left side
first then the upper and lower locks
of the right side in this sequence.
Then, slide to the left to remove.
5
5.
Pull out the left side of the
hinge cover
(5)
to remove, and then slightly lift up
the bottom to pull out.
CAUTION
When removing the
hinge cover
, use
caution not to damage the connectors and
wires on or around the fridge door.
NOTE
Keep the
hinge cover
in a safe place. It is
necessary when you return the door to the
initial position (before reversing the door).
Untitled-4 43
2016-07-21 11:24:58