43
13. Installation
13-2. Outdoor unit
Ęͱ͔̈͝ɇ̷
ʒ͔̈ʪ͝ϑ̈ͱ͝ϑ
˙ͱθʀɇɵ̷ʪ
ࣄ͔͔ࠟ࣍̈͝ʀ˵ࠟ࣎ࣅ
Ęͱ͔̈͝ɇ̷
ʒ͔̈ʪ͝ϑ̈ͱ͝ϑ
˙ͱθϑʀθʪи
ࣄ͔͔࣍̈͝ʀ˵࣎ࣅ
B
D
ʒߢ
E
F
ø
ʒߣ
t
Ɗϩɇ͝ʒɇθʒ
ʒ͔̈ʪ͝ϑ̈ͱ͝
ࣄ͔͔࣍̈͝ʀ˵࣎ࣅ
̷̷ͱиɇ͝ʀʪ
ࣄ͔͔࣍̈͝ʀ˵࣎ࣅ
Ɗϩɇ͝ʒɇθʒ
ʒ͔̈ʪ͝ϑ̈ͱ͝
ࣄ͔͔࣍̈͝ʀ˵࣎ࣅ
̷̷ͱиɇ͝ʀʪ
ࣄ͔͔࣍̈͝ʀ˵࣎ࣅ
Ɗϩɇ͝ʒɇθʒ
ʒ͔̈ʪ͝ϑ̈ͱ͝
ࣄ͔͔࣍̈͝ʀ˵࣎ࣅ
̷̷ͱиɇ͝ʀʪ
ࣄ͔͔࣍̈͝ʀ˵࣎ࣅ
đ̈͝ࢋ
ࣄ͔͔࣍̈͝ʀ˵࣎ࣅ
đ̈͝ࢋ
ࣄ͔͔࣍̈͝ʀ˵࣎ࣅ
đɇуࢋ
ࣄ͔͔
࣍̈͝ʀ˵࣎ࣅ
Ɗϩɇ͝ʒɇθʒ
ʒ͔̈ʪ͝ϑ̈ͱ͝
ࣄ͔͔࣍̈͝ʀ˵࣎ࣅ
̷̷ͱиɇ͝ʀʪ
ࣄ͔͔࣍̈͝ʀ˵࣎ࣅ
đ̈͝ࢋ
ࣄ͔͔࣍̈͝ʀ˵࣎ࣅ
4/6
(0.006/
0.009)
4(3/8)
9.5(3/8)
±0.2 (±0.007)
5.6(1/4)
+0.3(+0.011)
-0.2(-0.007)
3.4(1/8)
±0.2 (±0.007)
6 (1/4)
5 (3/16)
20 (3/4)
4.3 (3/16)
+0.2
(+0.007)
0(0)
0.9 (0.03)
8(3/16)
15(9/16)
9 (3/8)
28.5 (1-1/8) 8.4 (1-3/16)
+0.4 (+0.015)
0(0)
10(0.01)
8(3/16)
15(9/16)
±0.2 (±0.007)
7.1(1/4)
+0.3(+0.011)
-0.2(-0.007)
4.5(3/16)
±0.2 (±0.007)
7.9 (5/16)
9 (3/8)
30
(1-3/16)
8.4 (1-3/16)
+0.4 (+0.015)
0(0)
1.15 (0.04)
16(0.02)
8(3/16)
16(10/16) ±0.2 (±0.007)
9(3/8)
+0.3(+0.011)
-0.2(-0.007)
5.8(1/4)
±0.2 (±0.007) 9.5 (5/16)
13 (1/2)
33
(1-5/16)
8.4 (1-3/16)
+0.4
(+0.015) 0(0)
1.45 (0.05)
25(0.03)
8(3/16)
12(1/2)
±0.3 (±0.011)
11.5(7/16)
+0.5(+0.019)
-0.2(-0.007)
7.7(5/16)
±0.2 (±0.007)
11 (3/8)
15 (5/8)
34
(1-3/8)
8.4 (1-3/16) +0.4 (+0.015)
0(0)
1.7 (0.06)
8(3/16)
16.5(10/16)
13 (1/2)
8.4 (1-3/16)
35(0.05)
8(3/16)
16(10/16)
±0.3 (±0.011)
13.3(1/2)
+0.5(+0.019)
-0.2(-0.007)
9.4(3/8)
±0.2 (±0.007)
12.5 (1/2)
13 (1/2)
38 (1-1/2) 8.4 (1-3/16)
+0.4 (+0.015)
0(0)
1.8 (0.07)
8(3/16)
22(7/8)
13 (1/2)
43
(1- 11/16)
8.4 (1-3/16)
50(0.07)
8(3/16)
22(7/8)
±0.3 (±0.011)
13.5(1/2)
+0.5(+0.019)
-0.2(-0.007)
11.4(7/16)
±0.3 (±0.011) 17.5 (11/16)
14 (9/16)
50 (2)
8.4 (1-3/16)
+ 0.4(+0.015)
0(0)
1.8 (0.07)
70(0.10)
8(3/16)
24(1)
±0.4 (±0.015)
17.5(11/16)
+0.5(+0.019)
-0.4(-0.015)
13.3(1/2)
±0.4 (±0.015)
18.5 (3/4)
20 (3/4)
51 (2)
8.4 (1-3/16)
+ 0.4(+0.015)
0(0)
2.0 (0.078)
• Connect the rated cables only.
• Connect using a driver which is able to apply the rated torque to the screws.
• If the terminal is loose, fire may occur caused by arc. If the terminal is connected too firmly, the terminal may be damaged.
Ɵ̈˝˵ϩʪ̈͝͝˝ƟͱθαЇʪ
M4
ߢߣࢋߡॄߢߩࢋߡ̧࣍˝˙ࡔʀ͔࣎
ߡࢋߩߧॄߢࢋߤߡ̷࣍ɵ˙ࡔ˙ϩ࣎
AC power : 1(L), 2(N), L, N / Communication : F1, F2
उ
CAUTION
• When connecting cables, you can connect the cables to the electrical part or connect them through the holes below depending on the spot.
•
ŵЇ͝ϩθɇ͝ϑ͔̈ϑϑ̈ͱ͝ӥθ̈͝˝ɵʪϩиʪʪ͝ϩ˵ʪ̈͝ʒͱͱθɇ͝ʒͱЇϩʒͱͱθЇ̈͝ϩϑϩ˵θͱЇ˝˵ɇʀͱ͝ʒЇ̈ϩϩͱΧθͱϩʪʀϩɇ˝ɇ̈͝ϑϩʪуϩʪθ͝ɇ̷˙ͱθʀʪϑࡡɇ͝ʒ˙ʪʪʒϩ˵ʪʀͱ͝ʒЇ̈ϩϩ˵θͱЇ˝˵ϩ˵ʪиɇ̷̷
ϩͱ˝ʪϩ˵ʪθӥϩ˵θʪ˙θ̈˝ʪθɇ͝ϩΧ̈Χ̈͝˝ࢋ
• Remove all burrs at the edge of the knock-out hole and secure the cable to the outdoor knock-out using lining and bushing with an electrical insulation such
as rubber and so on.
• Must keep the cable in a protection tube.
• Keep distances of 1.97 in. or more between power cable and communication cable.
• When the cables are connected through the hole, remove the Plate bottom.
Connecting the Power Terminal
• Connect the cables to the terminal board using the compressed ring terminal.
• Cover a solderless ring terminal and a connector part of the power cable and then connect it.
Silver solder
