3-2
3. Disassembly and Reassemble
Description & Screws
Picture Description
3
Use Open Jig to release tape in corners and
all clips as indicated in red on sides and top &
bottom.
Gently lift up the Rear Cover starting at the
top being careful of function assembly at the
bottom.
When the 4 points (
•
)Hook is broken.
Although the hook is broken, the appearance
of the Rear cover is no problem and Gap
problem is not appeard after re-assembly.
To prevent the Inner Hook's broken.
•
1. Catch the upper section of the rear cover.
2. Open the rear cover from top to bottom.
If the wire is bent, need to change the wire.
•
Open Jigs
BN81-12884A
BN81-14946A
<Bottom Conner>
Jig Dir
ect
ion
Jig Dir
ect
ion
Jig Direction
Locking tabs locations
55"
•
L
: 6 point L
ock
ing
R
: 6 point L
ock
ing
Top
: 10 point Locking
Bottom
: 9 point Locking
SIDE AV
: 1 Point Locking
65"
•
L
: 7 point L
ock
ing
R
: 7 point L
ock
ing
Top
: 12 point Locking
Bottom
: 10 point Locking
SIDE AV
: 1 Point Locking