background image

English - 19

3D Basics

Features

Samsung's SSG-5100GB 3D glasses enable you to view 
3D images on your 3D TV. The Samsung 3D glasses 
communicate with Samsung 3D TVs via the 2.4GHz RF 
band.

 

The Samsung 3D glasses are only compatible with 
Samsung D, E, and F series 3D TV's that were 
released in 2011, 2012, and 2013. These 3D glasses 
cannot be connected to other Bluetooth devices.

Parts

LED Indicator & Power Button

Liquid crystal shutter

Battery Cover

For details on how to attach the glasses' temples and 
how to pair the glasses with the TV, refer to the separate 
3D glasses manual.

Replacing the Battery

If the red LED blinks every two seconds continually, 
replace the battery with a new one.

 

Insert the "+" side of the battery into the side marked 
with "+" in the battery compartment.

 

To check the remaining battery capacity, refer to the 
pairing section in this manual.

Pull the battery 

cover downward

Open the battery 

cover

Remove the 

battery

Replace the battery

Push the battery 

cover downward

Close the battery 

cover

Pairing 3D Active Glasses

 

What is Pairing? Pairing is the process of connecting 
3D glasses and a 3D TV so that the two devices can 
exchange data.

 

Ensure your Samsung TV and 3D glasses are no 
farther than 19.5 in (50 cm) apart from each other 
while pairing is in progress.

 

Turning the glasses on

Press the power button 
briefly. The green LED is 
turned on for 3 seconds. 
(Make sure that 3D is 
activated on the TV before 
using the 3D glasses.)

 

Turning the glasses off

Press the power button briefly. The red LED is turned 
on for 3 seconds.

 

Performing the pairing process

Turn the TV on and let it power up completely. Press 
and hold the Power button on the glasses. The green 
and the red LEDs blink alternately for 2 seconds.

 

Operating range

Recommended pairing distance

50 cm

2~6m

Recommended viewing distance

Recommended viewing distance

2~6m (6.5 to 19.5 ft)

Recommended pairing distance

50 cm or less (19.5 in)

 

Once the 3D glasses are paired, the remaining 
battery capacity is displayed on the TV screen. (This 
feature only applies to Samsung F series 3D TVs 
and 3D glasses that have been available since 2013.)

 

If you keep trying to pair the glasses and the TV, the 
battery level will decrease significantly. However, the 
battery level will recover to a certain degree in about 
a minute.

3D Active Glasses

[PF8500-RD]BN68-04829G-00Eng.indb   19

2013-02-26   �� 9:53:35

Summary of Contents for ps64f8500am





























Reviews: