background image

2.  Basic Permissions. 

All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are 

met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by 

this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, 

as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license 

otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, 

or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you 

do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and 

control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you.  

Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it 

unnecessary.

3.  Protecting Users’ Legal Rights From Anti-Circumvention Law. 

No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the 

WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a 

covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising 

rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of 

enforcing, against the work’s users, your or third parties’ legal rights to forbid circumvention of technological measures.

4.  Conveying Verbatim Copies. 

You may convey verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately 

publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any nonpermissive terms added in accord 

with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the 

Program. 

You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee.

5.  Conveying Modified Source Versions. 

You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of 

section 4, provided that you also meet all of these conditions:
a)  The work must carry prominent notices stating that you modified it, and giving a relevant date.

b)  The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. 

This requirement modifies the requirement in section 4 to “keep intact all notices”.

c)  You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore 

apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This 

License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it.

d)  If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do 

not display Appropriate Legal Notices, your work need not make them do so. 

A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and 

which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an “aggregate” 

if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation’s users beyond what the individual 

works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate.

6.  Conveying Non-Source Forms. 

You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machinereadable 

Corresponding Source under the terms of this License, in one of these ways:
a)  Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the 

Corresponding Source fixed on a durable physical medium customarily used for software interchange.

b)  Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for 

at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the 

object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical 

medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of 

source, or (2) access to copy the Corresponding Source from a network server at no charge.

c)  Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only 

occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b.

d)  Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding 

Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along 

with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by 

you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find 

the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as 

long as needed to satisfy these requirements.

e)  Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of 

the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is 

excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work.

 

A “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for personal, family, or 

household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, 

doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, “normally used” refers to a typical or 

common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects 

or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-

consumer uses, unless such uses represent the only significant mode of use of the product. “Installation Information” for a User Product means any 

methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product 

from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object 

code is in no case prevented or interfered with solely because modification has been made. If you convey an object code work under this section in, 

or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the 

User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding 

English

BN68-02113G_Eng.indb   92

2009-04-09   오후 5:33:24

Summary of Contents for PS63B680T6W







































































































Reviews: