Samsung PS63A756T1M, User Manual

Page: 56 / 337

English - 5
Listening through a Receiver (Home theater)
You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ENTER E button to select
(HDMI-CEC) .
. Press the ▲ or ▼ button to select Receiver . Press the ◄ or ► button to select
On or Off .
3. Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the Optical IN jack of
the receiver to the Optical Out jack of the TV.
When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is
displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital
component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater
receiver.
When using the WISELINK Pro feature, sound may not output properly through the receiver.
When listening through the receiver, there are restrictions for using the PIP and audio-related (MTS, Preferred language)
menus.
If there is a power interruption to the TV when the
Receiver
is set to
On
(by disconnecting the power cord or a power failure),
the Select Speaker may be set to External Speaker when you turn the TV on again. (see page 22)
Troubleshooting for
Symptom Solution
Anynet
+
does not work. Check if the device is an device. The system supports devices only.
Connect only one receiver (home theater).
Check if the device power cord is properly connected.
Check the device’s Video/Audio/HDMI 1.3 cable connections.
Check whether (HDMI-CEC) is set to On in the setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is exclusive remote control.
doesn’t work in certain situations. (Searching channels, Operating WISELINK Pro, Plug
& Play, etc.)
When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or
turn your TV off and on again.
Check if the Function of device is set on.
•
•
•
•
•
•
•
•
•
•
I want to start Anynet
+
. Check if the device is properly connected to the TV and check if the (HDMI-
CEC) is set to On in the Setup menu.
Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to
show the menu and select a menu you want.
•
•
I want to exit Anynet
+
. Select View TV in the menu.
Press the
SOURCE
button on the TV remote control and select a device other than
devices.
(Note that the channel button operates only when a tuner-embedded device is not
connected.)
•
•
•
The message Connecting
to device...
appears on the screen.
You cannot use the remote control when you are configuring or switching to a view
mode.
Use the remote control when the setting or switching to view mode is complete.
•
•
The Anynet
+
device does
not play.
You cannot use the play function when Plug & Play is in progress.
The connected device is
not displayed.
Check whether or not the device supports functions.
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether (HDMI-CEC) is set to On in the setup menu.
Search devices again.
You can connect an device using the HDMI 1.3 cable only. Some HDMI cables may not
support functions.
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord
or a power failure, please repeat the device scan.
•
•
•
•
•
•
The TV programme cannot
be recorded.
Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver.
N
N
N
N
N
N
View TV
Device List
Recording
: DVDR
DVDR Operation
Receiver
◄ On ►
Setup
U
Move
L
Adjust
R
Return
BN68-01757A-Eng.indb 56 2008-09-24 오전 11:09:32