Samsung PS50C6900 User Manual Download Page 10

Page: 10 / 64

English

Connections

Changing the Input Source

Source List

Use to select TV or other external input
sources such as DVD / Blu-ray players
/ cable box / STB satellite receiver
connected to the TV.

■

TV / Ext. / PC / AV / Component
/ HDMI1/DVI / HDMI2 / HDMI3 /
HDMI4 / USB

✎

In the

Source List

, connected

inputs will be highlighted.

✎

Ext.

and

always stay activated.

Edit Name

■

VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC /
DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA

Name the device connected to the input jacks to make
your input source selection easier.

✎

When a PC with a resolution of 1920 x 1080 @
60Hz is connected to the

HDMI IN 1(DVI)

port,

you should set to

DVI PC

mode under

Edit Name

✎

When connecting an HDMI/DVI cable to the

HDMI IN 1(DVI)

port, you should set to

DVI PC

DVI Devices

mode under

Edit Name

✎

If an HDMI cable is connected to the

HDMI IN 1(DVI)

port, the audio may not work. In

this case, connect to the

PC/DVI AUDIO IN

port.

CONNECTIONS

COMMON INTERFACE

Slot

To watch paid channels, the “CI or CI+ CARD” must be inserted.

If you don’t insert the “CI or CI+ CARD,” some channels will
display the message “Scrambled Signal”.

The pairing information containing a telephone number, the “CI or
CI+ CARD” ID the Host ID and other information will be displayed
in about 2~3 minutes. If an error message is displayed, please
contact your service provider.

When the configuration of channel information has finished, the
message “Updating Completed” is displayed, indicating the
channel list is updated.

✎

NOTE

You must obtain a “CI or CI+ CARD” from a local cable service provider.

When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may
cause damage to it.

Insert the “CI or CI+ CARD” in the direction marked on the card.

The location of the

COMMON INTERFACE

slot may be different depending on the model.

“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

If you have any problems, please contact a service provider.

Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be
seen.

SOURCE

[PC6900_UK]BN68-02807S-01Eng.indb 10

2010-05-12 오후 2:54:32

Summary of Contents for PS50C6900

































































Search results

Summary of Contents for PS50C6900

Reviews:

Related manuals for PS50C6900

Brands by name

Popular brands

Samsung PS50C6900, User Manual

Search results

Summary of Contents for PS50C6900

Reviews:

Related manuals for PS50C6900

Brands by name

Popular brands