background image

1

English

Using the M

enus

Picture Menu

Picture

  

Option

Description

Mode

You can select the type of picture which best corresponds to 

your viewing requirements.

Dynamic / Standard / Eco / Movie

Cell Light /  

Contrast /  

Brightness / 

Sharpness /  

Colour /  

Tint (G/R)

Your television has several setting options that allow you to 

control the picture quality.

Cell Light

: Adjusts the pixel brightness

Contrast

: Adjusts the contrast level.

Brightness

: Adjusts the brightness level..

Sharpness

: Adjusts the sharpness

Colour

: Adjusts colour saturation of the picture

Tint (G/R

): Adjusts the colour tint of the picture.

When you make changes to 

Cell Light

Contrast

Brightness

Sharpness

Colour 

or 

Tint (G/R)

, the 

OSD will be adjusted accordingly.

The adjusted values are saved for each picture mode.

In Analogue TV, Ext., AV modes of the PAL system, you 

cannot use the Tint Function.

In 

PC

 mode, you can only make changes to 

Cell Light

Contrast

 and 

Brightness

.

Each adjusted setting will be stored separately 

according to its input mode.

The energy consumed during use can be significantly 

reduced if the level of brightness of the picture is 

reduced, and then this will reduce the overall running 

cost.

Press the 

TOOLS

 button to 

display 

Tools

 menu. 

You can also set the picture 

mode by selecting 

Tools

 → 

Picture Mode

.

Mode 

: Standard 

Cell Light 

: 7

Contrast 

: 95

Brightness 

: 45

Sharpness 

: 50

Colour 

: 50

Tint (G/R) 

: G50/R50

Advanced Settings

Picture

BN68-02119C_Eng.indb   21

2009-04-09   오후 3:17:55

Summary of Contents for PS50B560



































































Reviews: