Samsung PS42V6SX/XEH, Service Manual

Page: 26 / 109

Alignment & Adjustment
3-10 Samsung Electronics
The Micom program is to be copied to the folder marked in red and the name of the program is to be the same as the file name
marked in blue.
(If the Micom program is not in the folder marked in red, change the path to the folder which includes the Micom program and
then save the file.)
3. When completing all the procedures above, connect the Jig and the PCB, and run the G-Probe program.
After that Enter 'test 10' as shown in the following figure and press Enter or click the Execute button.
If the result appears as shown in the following figure, it is properly connected.