Samsung PS42V6SX/XEH, Service Manual

Page: 21 / 109

Alignment & Adjustment
Samsung Electronics 3-5
2. Adjust the white balance of AV, Component and DVI Modes.
a) Set the input to the mode in which the adjustment will be made (AV Component DVI).
* Input signal - VIDEO Mode : Model #1 (744X484 Mode), Pattern #16
- Component, DVI Mode : Model #6 (1280X720 Mode), Pattern #16
b) Enter factory W/B.
c) Adjust the low light.
- Adjust sub - Brightness to set the 'Y' value.
- Adjust red offset ('x') and blue offset ('y') to the color coordinates. ( x : 280, y : 285, Y : 1.1fL)
* Do not adjust green offset data.
3-3-4 Method of Adjustment
1. Adjust the basic level of Component and PC input signals.
a) Set the input to the mode in which the adjustment will be made (Component PC ).
* Input signal - Component Mode : Model #6 (1280X720 Mode), Pattern #15 (picture 4-1)
- PC Mode : Model #21 (1024X768 Mode), Pattern #17 (Picture 4-2)
b) Enter factory Calibration (DTV, PC Mode Only).
* DTV Calibration Source change for PC
PC Calibration
Picture 4-1 Color bar
Picture 4-2 16gray
Picture 4-3 Toshiba ABL Pattern
Low light
Measurement point