background image

39

English

An

ynet+

Recording

You can make a recording of a TV programme using a Samsung recorder.

1

  Press the 

TOOLS

 button. Press the 

ENTER

E

 button to select 

Anynet

+

 (HDMI-CEC)

2

  Press the ▲ or ▼ button to select 

Record: (device_name)

, then press the 

ENTER

E

 button. Recording begins.

When there is more than one recording device

 

When multiple recording devices are connected, the recording devices are 

listed. Press the ▲ or ▼ button to select a recording device and press the 

ENTER

E

 button. Recording begins.

When the recording device is not displayed

 

Select 

Device List 

and press the red button to search devices.

3

   Press the 

EXIT

 button to exit.

You can record the source streams by selecting 

 

Record: (device_name)

.

Pressing the 

 

 

button will record whatever you are currently watching. If 

you are watching video from another device, the video from the device is 

recorded.

Before recording, check whether the antenna jack is properly connected to the 

 

recording device. To properly connect an antenna to a recording device, refer 

to the recording device’s users manual.

Listening through a Receiver 

(Home Theatre)

You can listen to sound through a receiver instead of the TV speaker.

1

  Press the 

TOOLS

 button. Press the 

ENTER

E

 button to select 

Anynet

+

 (HDMI-CEC)

.

2

  Press the ▲ or ▼ button to select 

Receiver

. Press the ◄ or ► button to select 

On

 or 

Off

.

  Press the 

EXIT

 button to exit.

If your receiver supports audio only, it may not appear in the device list.

 

The receiver will work when you have properly connected the Optical IN jack 

 

of the receiver to the Optical Out jack of the TV.

When the receiver (home theater) is set to On, you can hear sound output 

 

from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the 

TV will send out 5.1 channel sound to the Home theater receiver. When the 

source is a digital component such as a DVD and is connected to the TV via 

HDMI, only 2 channel sound will be heard from the Home Theater receiver.

If there is a power interruption to the TV when the 

 

Receiver 

is set to 

On 

(by 

disconnecting the power cord or a power failure), the 

Speaker Select 

may be 

set to 

External Speaker 

when you turn the TV on again.

View TV
Device List
Record 

DVDR

DVDR MENU
DVDR INFO
Receiver  

 

 On 

Setup

U  

Move         

L

  Adjust         

 

Return

View TV
Device List
Record 

DVDR

DVDR MENU
DVDR INFO

Receiver  

◄ 

 On 

Setup

U  

Move         

L

  Adjust         

 

Return

BN68-02354D.indb   39

2009-06-30   �� 10:21:15

Summary of Contents for PS42B450B1W

















































Reviews: