Samsung POWERbot VR2AJ9040WG, User Manual

Page: 9 / 120

ENGLISH- 09
CAUTION
Before use
f
Insert the dustbin before using POWERbot.
f
Be careful with the followings for proper
automatic recharging.
– Always turn on the power of the docking
station.
– Install the docking station where POWERbot
can easily find.
– Do not leave any object in front of the docking
station.
f When installing the docking station, do not
leave the cord carelessly on the floor since
POWERbot may get tangled by it.
f
Do not use POWERbot on black colored
floors.
– The POWERbot may not be able to operate
normally.
f
Do not pick up POWERbot by the dustbin
holder.
f Do not place any objects within 2 ft (0.5 m)
to both sides and 4 ft (1 m) to the front of the
docking station.
f
Make sure the docking station's charging
contact is not damaged or have any foreign
matters on it.
f Do not install the docking station in an area
with a dark floor.
– If the floor around the docking station is dark,
recharging is hindered.
f Move any obstacles that may disturb
POWERbot's movement (such as children's
indoor swing or slides) before cleaning.
CAUTION
In use
f
Using POWERbot on thick carpet may
damage both POWERbot and the carpet.
– The POWERbot cannot pass over carpet that is
thicker than 0.4 in (1 cm).
f
Do not use POWERbot on tables or other
high surfaces.
– There is a risk of damage if it falls.
f
The POWERbot may bump into chair, desk
legs therefore move them away for faster and
efficient cleaning.
f When POWERbot is operating, do not lift it up
or carry it to another area.
f
Do not hold by driving wheels of POWERbot
when carrying it to another area.
f
Do not put any objects on top of POWERbot
since it may cause malfunction.
f
Remove any large papers or plastic bags
immediately when using POWERbot since
they may block the intake.
f
Do not aim the red pointer directly at people
or animals.
CAUTION
Cleaning and
maintenance
f Prevent any damage to POWERbot by
complying with the following.
– Do not clean POWERbot by spraying water
directly onto it or use benzene, thinner, acetone
or alcohol to clean it.
f Do not disassemble or repair POWERbot.
This should only be done by a certified
repairman.
f
Always keep the obstacle sensor and cliff
sensor clean.
– If foreign matter accumulates, sensors may
malfunction.
zyYhq`Wgg|†ZŽŒ†WW^[Wi†W]†|zhU•‹‰GGG` YWX^TW[TW]GGG㝘䟸G_a[\aYY