Samsung PN51D7000 E- User Manual Download Page 307

Page: 307 / 325

▶ ◀

▶

English

Issues

Solutions and Explanations

Caption

on TV menu is greyed

out.

•

You cannot select

Caption

menu if youhave selected a source

connected to the TV via HDMI or Component.

•

The external device’s

Capton

function must also be activated.

There is a plastic smell from the
TV.

•

This smell is normal and will dissipate over time.

The TV Signal Information is
unavailable in the Self Diagnosis
menu.

•

This function is only available for digital channels the TV receives from
an Antenna / RF/Coax connection.

The TV is tilted to the side.

•

Remove the base stand from the TV and reassemble it.

The channel menu is greyed
out (unavailable).

•

The

Channel

menu is only available when you select the TV source.

Summary of Contents for PN51D7000 E-






































































































































































































































































































































Search results

Summary of Contents for PN51D7000 E-

Reviews:

Related manuals for PN51D7000 E-

Brands by name

Popular brands

Samsung PN51D7000 E-, User Manual

Search results

Summary of Contents for PN51D7000 E-

Reviews:

Related manuals for PN51D7000 E-

Brands by name

Popular brands