(QJOLVK
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn on
the TV, press the
POWER
3
button.
✎
Plug & Play
is available only when the
Source
is set to TV.
✎
To return to the previous step in the
Plug & Play
sequence, select
Previous
, and then press
ENTER
(
.
✎
Before turning on the TV, make sure you have connected the TV to an antenna or cable connection (p. 8).
1
Selecting the OSD
Language
Press the
Ÿ
or
ź
button to select a language. Press
ENTER
(
twice
when done.
2
Setting up Network
Set up your network connection. Press the
ENTER
(
button to start. If
you do not know your network set up information or want to set to it later,
select
Skip
. We suggest you skip network connection setup now and
refer to “Wired/Wireless Network Connection” in the e-Manual for set up
requirements and instructions, and the Network Connection section of this
manual (Page 16). You can set up the network connection later using the
Network menu.
3
Software Upgrade
When network connection settings are complete, Software Upgrade is available.
Select
Next
to upgrade TV software. Your TV will automatically upgrade, if your TV need a
software upgrade. If you want to upgrade later, select the
Skip
. For more information, refer
to “Software Upgrade” (Preference Features
ĺ
Support Menu) in the e-Manual.
✎
This may take some time, depending on network status.
4
Selecting the usage
mode
Press the
Ÿ
or
ź
button to select, and then press the
ENTER
(
button twice.
y
Select the
Home Use
mode.
Store Demo
mode is for retail environments.
5
Setting the
Clock
Mode
Press the
Ÿ
or
ź
button to select
Auto
or
Manual
, and then press
ENTER
(
twice.
✎
If you selected
Auto
, you’ll go to the
Time Zone
and
DST
screen. Select
Time Zone
or
DST
, and then press
ENTER
(
. On the
Time Zone
screen, use the
Ÿ
or
ź
button to select your zone, and then press
ENTER
(
. On the
DST
screen, press,
ENTER
(
, then select whether to turn
DST
(Daylight Savings Time) on or off. When
done, press
ENTER
(
.
✎
If you selected
Manual
, you’ll go to the
Date
and
Time
screen. Select
Date
or
Time
,
and then press
ENTER
(
. Then, use the number buttons or the
Ÿ
or
ź
button to
set the date or time. Use the
Ż
or
Ź
button to move between entry fields. When
done setting the Date and Time, select
Next
, and then press
ENTER
(
.
6
Selecting search
options for auto tuning
Press the
Ÿ
or
ź
button to select
Air
or
Cable
, and then press
ENTER
(
. A check
appears on your selection. Select
Next,
and then press the
ENTER
(
button. You can
check both if you have both connected.
✎
If you selected
Cable
, you’ll go to the Cable System screen. Use the
Ÿ
or
ź
button
to select Digital or Analog, and then press.
ENTER
(
. Use the
Ÿ
or
ź
button
to select the correct cable signal format -
STD
,
HRC
, or
IRC
- and then press
ENTER
(
. Most cable systems use
STD
. Select the correct cable signal format for
both the Digital and Analog systems.
When done, select
Search
, and the press
ENTER
(
.
7
Selecting and
memorizing channels
The channel search will start automatically. This can take up to 30 minutes.
For more information, refer to
Channel
ĺ
Auto Program
in the e-Manual.
✎
Press the
ENTER
(
button at any time to interrupt the memorization process.
8
Enjoy your TV.
If you want to watch a broadcast program, select
Close
. If you want to enjoy
Smart Hub
,
select
Smart Hub
.
Smart Hub
will start. For more detailed information, refer to “Smart
Hub” in the e-Manual.
If You Want to Rerun Plug & Play...
"
MENU
ĺ
System
ĺ
Plug & Play
ĺ
ENTER
(
✎
NOTE
y
To change the TV’s setting from
Store Demo
to
Home Use
when not in Plug & Play, press the volume button on the TV.
When you see the volume bar on the screen, press and hold the
MENU
button on the TV for 5 sec.
P
POWER
