Samsung PN51D530A3F E-Manual Download

Page: 168 / 212

◀

▶

English

◀

The connected device is not
displayed.

•

Check whether or not the device supports functions.

•

Check whether or not the HDMI cable is properly connected.

•

Check whether

(HDMI-CEC)

is set to

in the

setup menu.

•

Search devices again.

•

requires an HDMI connection. Make sure the device is
connected to your TV with an HDMI cable.

•

Some HDMI cables may not support functions.

•

If the connection is terminated because there has been a power
failure or the HDMI cable has been disconnected, please repeat the
device scan.

The TV sound is not output
through the receiver.

•

Connect the optical cable between TV and the receiver.

Summary of Contents for PN51D530A3F





















































































































































































































Search results

Summary of Contents for PN51D530A3F

Reviews:

Related manuals for PN51D530A3F

Brands by name

Popular brands

Samsung PN51D530A3F, E-Manual

Search results

Summary of Contents for PN51D530A3F

Reviews:

Related manuals for PN51D530A3F

Brands by name

Popular brands