Samsung PN42A450P1D User Manual Download

Page: 70 / 75

English - 70

Moving to the remembered position
1

Complete Step 1 of

Entering the menu

Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to the

saved position.

➢

You can move the wall mount to one of the 3 pre-set positions by pressing the

Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.

➢

If you adjust the positon after moving to a pre-set position, the position display

will disappear.

➢

For installation, refer to the Installation Manual provided with the wall mount.

➢

For product installation and the installation and moving of the wall mount,

make sure to consult a specialized installation company.

➢

This installation manual is to be used when attaching the wall mount to a wall.

When attaching to other building materials, please contact your nearest dealer.

➢

The auto wall mount will not work when is operating.

BN68-01399A-00-(64-74)_0212.indd70 70

2008-02-20 ¿ÀÈÄ 6:38:32

Summary of Contents for PN42A450P1D












































































Search results

Summary of Contents for PN42A450P1D

Reviews:

Related manuals for PN42A450P1D

Brands by name

Popular brands

Samsung PN42A450P1D, User Manual

Search results

Summary of Contents for PN42A450P1D

Reviews:

Related manuals for PN42A450P1D

Brands by name

Popular brands