3
Caution
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in a minor or moderate injury.
Leaking, overheating, or damaged battery could result in
fi
re or injury.
- Use battery with the correct speci
fi
cation for the camera.
- Do not short circuit, heat or dispose of battery in
fi
re.
- Do not insert the battery with the polarities reversed.
Remove the battery when not planning to use the camera for a
long period of time. Otherwise the battery may leak corrosive
electrolyte and permanently damage the camera’s components.
Do not
fi
re the
fl
ash while it is in contact with hands or objects. Do
not touch the
fl
ash after using it continuously. It may cause burns.
Do not move the camera while it is switched on, if you are using
the AC adapter. After use, always switch off the camera before
unplugging the cable from the wall socket. Then make sure that
any connector cords or cables to other devices are disconnected
before moving the camera. Failure to do so may damage the
cords or cables and cause a
fi
re or electric shock.
Take care not to touch the lens or lens cover to avoid taking an
unclear image and possibly causing camera malfunction.
Avoid obstructing the lens or the
fl
ash when you capture an image.
When using this camera in low temperatures, you may experience
the following. These are not camera malfunctions and usually
recover at normal temperature.
-
It takes longer to turn on the LCD monitor and the color may
differ from the subject.
-
When changing the composition, there may be an after image on
the LCD monitor.
Credit cards may be demagnetized if left near case. Avoid leaving
magnetic strip cards near the case.
Never connect the 20 pin connector to the USB port of a PC. This
carries a high risk of computer malfunction.
Contents
READY
RECORDING
007 System
chart
007 Package
Contents
007 Sold
Separately
008 Identi
fi
cation of features
008 Front
&
Top
009 Back
010 Bottom
010 5 Function button
011 Self-timer
lamp
011 Camera Status Lamp
011 Mode
icon
012 Connecting to a Power Source
015 Inserting the memory card
016
Instructions on how to use the memory card
018 LCD monitor indicator
019 How to use the menu
020 Starting the recording mode
020 Selecting
modes
020 How to use the Smart Auto mode
022 How to use the Program mode
022
How to use the DUAL IS (Dual Image
Stabilization) mode
023 How to use the Scene modes
025 How to use the Movie clip mode
