background image

C

HAPTER

O

NE

: Y

OUR

N

EW

TV

1

.2

Familiarizing Yourself with The TV

Front Panel Buttons

The buttons on the front panel control your TV’s basic features, including the on-screen
menu. To use the more advanced features, you must use the remote control.

Y

O U R

N

E W

T V

Œ

Remote Control Sensor

Aim the remote control towards this spot on the
TV.

´

MENU

Press to see an on-screen menu of your TV's fea-
tures.

ˇ

TV/VIDEO

Press this button to display a menu of all the avail-
able signal sources. When the menu appears, use
the Joystick up or down to highlight a particular
source, and then move the joystick to the right to
select it.

¨

MUTE

Press to temporarily cut off the sound.

ˆ

Timer indicator

When the TV is turned on, the Timer indicator
blinks ten times. 
This indicator illuminates when the Timer mode is
set to the “On” position after setting the clock and
either the On timer or Off timer, with the remote
control. Even if the power is turned off, this indi-
cator stays lit. (Clock must be set before using this
function.)

Ø

POWER

Press to turn the TV on and off.

VOL – , +

Press to increase or decrease the volume. Also
used to select items on the on-screen menu.

CH

and CH

Press to change channels. Also press to highlight
various items on the on-screen menu.

Summary of Contents for PCL5415R




































































Reviews: