2- 21
2. Introduction and Specification
Boot
Boot Device Priority
=> Can set the boot device priority.
NumLock
=> Can set the use of NumLock key when booting.
Enable Keypad
=>
[Only By Fn Key] : Numeric key can be recognized, only case the Fn key is pressed simultaneously.
[By NumLock] : Numeric key can be recognized when Numlock is on state.
Summary Screen
=> Can set whether the system information is shown or not when booting.
Boot-time Diagnostic Screen
=> Can set Samsung logo screen.
PXE Oprom
=> Can set whether the PXE Oprom is always initialized or not.
General Users will not use of network boot, so [Only with F12] option is recommended.
Brightness Control Mode
=> [Auto] The brightness level is "1" in case battery state when resume from S3 or booting, and
when adapter is de-inserted from system.
=>[User Control] : Remember the setting by users.
Wireless Device Control
=> [Always On] : Wireless LAN is always on.
=> [Last Status] : Remember the last status.
Smart Battery Calibration
=> Battery Calibration.
- This Document can not be used without Samsung's authorization -
