Samsung OfficeServ 7200 System Description Download

Page: 70 / 137

CHAPTER 2.

Error! Use the Home tab to apply

제목

장

제목

1 to the text that you want to appear here.

2-48

The components on the front panel of the OAS have the functions below:

Table 2.35 Ports and LEDs of the OAS

Ports, LEDs

Functions

LAN

Port that connects the Ethernet.

SIO

UART port (for tests).

RST

Button for resetting the OAS.

PWR LED

This LED indicates the power supply status.

- Off: Power is not being supplied.

- On: Power is being supplied properly.

RUN LED

This LED indicates OAS status.

- Off: Power is not being supplied.

- On: Booting.

- Blink: The RAM program is operating.

LAN Tx LED

This LED indicates the status of the Ethernet data transmission.

- Off: Data does not exist.

- On or blink: Data is being transmitted.

LAN Rx LED

This LED indicates the reception status of the link and Ethernet data.

- Off: Data does not exist or the link is not connected.

- On or blink: Data is being received.

SVC1 LED

This LED indicates if the MGI service is being offered.

This LED turns on when the MGI software task can be serviced.

SVC2 LED

This LED indicates if the MFR service is being offered.

This LED turns on when the MFR software task can be serviced.

SVC3 LED

This LED indicates if the MPS service is being offered.

This LED turns on when the MPS software task can be serviced.

SVC4 LED

This LED indicates if the LINK is connected to MP.

This LED turns on when the LINK is connected to MP.

Mounting the OAS in 16 channels slot

If the OAS is mounted on one of 16 channels slot, no board can be mounted on

the other slot. If any board is mounted on the other slot, the board will not work.

(If the slot 1 is occupied with the OAS, the slot 2 should be empty. And if the slot 2

is occupied with the OAS, the slot 1 should be empty.)

Summary of Contents for OfficeServ 7200










































































































































Search results

Summary of Contents for OfficeServ 7200

Reviews:

Related manuals for OfficeServ 7200

Brands by name

Popular brands

Samsung OfficeServ 7200, System Description

Search results

Summary of Contents for OfficeServ 7200

Reviews:

Related manuals for OfficeServ 7200

Brands by name

Popular brands