Samsung OfficeServ 7200 System Description Download

Page: 28 / 137

CHAPTER 2.

Error! Use the Home tab to apply

제목

장

제목

1 to the text that you want to appear here.

2-6

About the Managed LIM

The managed LIM is controlled by the WIM board and provides extended

functions related to the layer2 QoS management such as 802.1p (Packet

Preference), 802.1q (VLAN), IGMP Snooping in addition to the layer 2 switch

function. If mounting LIM or PLIM to the slot 2 in the status that WIM is mounted

in the slot 1, the Managed LIM function is operated.

Blank Board Function

The blank board is a dummy board to protect the system from other objects when

the board is not mounted in the universal slot like a screen board.

Summary of Contents for OfficeServ 7200










































































































































Search results

Summary of Contents for OfficeServ 7200

Reviews:

Related manuals for OfficeServ 7200

Brands by name

Popular brands

Samsung OfficeServ 7200, System Description

Search results

Summary of Contents for OfficeServ 7200

Reviews:

Related manuals for OfficeServ 7200

Brands by name

Popular brands