50
Standard Signal Mode Table
Model Name
S27AG50* / S32AG50* / S27AG52* /
S32AG52*
S28AG70*
S49AG95*N
Synchronization (PANEL Spec)
Vertical Frequency
48 ~ 165 Hz
48 ~ 144 Hz
60 ~ 240 Hz
Resolution
Optimum resolution
2560 x 1440 @ 144 Hz (HDMI)
2560 x 1440 @ 165 Hz (DisplayPort)
3840 x 2160 @ 144 Hz (HDMI, Display Port) 5120 x 1440 @ 144 Hz (HDMI)
5120 x 1440 @ 120 Hz (DisplayPort)
Maximum resolution
5120 x 1440 @ 144 Hz (HDMI)
5120 x 1440 @ 240 Hz (DisplayPort)
―
If dual monitor mode is used under DSC resolution conditions, the mode may not work properly due to the output limit of the graphics card. (DSC resolution: 5120 x 1440 @ 240 Hz or 3840 x 2160 @ 144 Hz)
If that is the case, lower the resolution of the sub-monitor or lower the
Input Port Ver.
or
DisplayPort Ver.
value set for your monitor.
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the following table by referring to the graphics card user manual.
S27AG50* / S32AG50* / S27AG52* / S32AG52*
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
Port
HDMI IN
DP IN
IBM, 720 x 400
31.469
70.087
28.322
-/+
O
O
MAC, 640 x 480
35.000
66.667
30.240
-/-
O
O
MAC, 832 x 624
49.726
74.551
57.284
-/-
O
O
MAC, 1152 x 870
68.681
75.062
100.000
-/-
O
O
VESA, 640 x 480
31.469
59.940
25.175
-/-
O
O
VESA, 640 x 480
37.861
72.809
31.500
-/-
O
O
VESA, 640 x 480
37.500
75.000
31.500
-/-
O
O
VESA, 800 x 600
35.156
56.250
36.000
+/+
O
O
VESA, 800 x 600
37.879
60.317
40.000
+/+
O
O
VESA, 800 x 600
48.077
72.188
50.000
+/+
O
O
VESA, 800 x 600
46.875
75.000
49.500
+/+
O
O
