- 9 -
Preparations
Installation
Attaching the Stand
"
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing
downwards.
"
Disassembly is the reverse order of assembly.
x 4
x 3
1
1
2
3
As shown in the figure, remove the product and foam
cushion, and then place the product on the table with its
front side facing the floor.
Put the stand base onto the
stand neck as the direction
shown in the figure. Check
that the stand neck is
firmly connected.
Tightly fasten the
connecting screw at the
bottom of the stand base.
3
4
5
Push the assembled stand into the main body in the
direction of the arrow as shown in the figure.
Tightly fasten the connecting screw at the bottom of the
main body.
4
6
4
7
Stand up the monitor as shown in the figure.
●
Hold the lower corners or edges of the product
when moving it.
●
Do not directly apply pressure on the screen.
●
Do not hold the screen when moving the product.
●
Do not hold the product upside down only by the
stand.
Stand assembly is complete.
