English - 37
English - 37
What should I do if, after the cooking zones have been
switched off, residual warmth is not indicated in the display?
Check for the following possibility:
•
The cooking zone was only briefly used and therefore did not
become hot enough. If the cooking zone is hot, please call the
customer service centre.
What should I do if the cooking zone will not switch on or off?
This could be due to one of the following possibilities:
•
The control panel is partially covered by a damp cloth or liquid.
•
The child safety lock is on.
What should I do if the display is illuminated?
Check for the following:
•
The control panel is partially covered by a damp cloth or liquid.
To reset, press the “On/Off” control sensor.
What should I do if the display is illuminated?
Check for the following:
•
The hob is overheated because of abnormal operation.
•
After hob is cooled down, press the “On/Off” control sensor for
resetting.
What should I do if the display is illuminated?
Check for the following:
•
Cookware is unsuitable or too small or no cookware has been
placed on the cooking zone.
•
If you use suitable cookware, displayed message will
automatically disappear.
What should I do if the cooling fan runs after the hob is
turned off?
Check for the following:
•
When you have finished using the hob, the cooling fan runs by
itself for cooling down.
•
After the hob’s electronics has cooled down, the cooling fan will
be turned off.
If you request a service call because of an error made in operating
the appliance, the visit from the customer service technician may
incur a charge even during the warranty period.
07
W
ARRANT
Y AND SERVICE
NZ64H57479K_EE_DG68-00560A-00_EN.indd 37
2014-04-15 �� 2:05:29
