Samsung NZ63R3727BK, User Manual

Page: 20 / 64

20 English
Ope
ration
Operation
Start cooking Finish cooking
Touch the ON/OFF control for three seconds. After
power on, the buzzer beeps once, all displays show
“––” or “– – –”, indicating that the induction hob has
entered the state of standby mode.
Place a suitable pan on the cooking zone that you
wish to use.
• Make sure the bottom of the pan and the surface of
the cooking zone are clean and dry.
Touching the heating zone selection control, and an
indicator next to the key will flash
Select a heat setting by touching the slider control
• If you don’t choose a heat setting within 1 minute,
the Induction hob will automatically switch off. You
will need to start again at step 1.
• You can modify the heat setting at any time during
cooking.
power up
power down
If the display shows with the heat setting
This means that:
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is placed
on it.
•
•
•
you have not placed a pan on the correct cooking zone or,
the pan you’re using is not suitable for induction cooking or,
the pan is too small or not properly centered on the cooking zone.
Turn the cooking zone off by touching the slider to the
left. Make sure the display shows “0”.
OR
Touching the cooking zone selection control for
approximately 2 seconds to turn off the cooking zone.
Turn the whole cooktop off by touching the ON/OFF
control.
Beware of hot surfaces
“H” will show which cooking zone is hot to touch. It
will disappear when the surface has cooled down to a
safe temperature. It can also be used as an energy
saving function if you want to heat further pans, use
the ceramic glass that is still hot.
OR
POWER DOWN