Samsung NX60T8111S Service Manual Download

Page: 4 / 95

1. Precaution

This document can not be used without Samsung’s authorization.

1. Precaution

1-1 Forward

This SAMSUNG Service Manual, “Slide In Gas Ranges,” provides the technician with information on the operation and

ϑʪθӬʀʪͱ˙ϩ˵ʪϑ̷̈ʒʪ̈͝ϑʪ̷˙ࣗʀ̷ʪɇ̈͝͝˝˝ɇϑθɇ͝˝ʪϑࢋÃϩ̈ϑϩͱɵʪЇϑʪʒɇϑɇϩθɇ̈̈͝͝˝ϑʪθӬʀʪ͔ɇ͝Їɇ̷ࢋͱθϑΧʪʀ̈ѣʀ̈͝˙ͱθ͔ɇϩ̈ͱ͝ͱ͝ϩ˵ʪ

model being serviced, refer to the user manual or tech sheet provided with the gas range.

1-2 Safety Precautions

• Repairs of the appliance should be carried out by a licensed technician only. Incorrect repairs may result in dangerous

situations. If you need repairs, contact a SAMSUNG Service Center or your dealer.

• If the power cord is defective, it must be replaced by a licensed technician with a UL-listed range cord.

• If the gas supply is damaged or defective, it must be replaced by a licensed technician or gas supplier.

• Electrical leads and cables should not be allowed to touch the oven.

• Rating plate is located on the left side of the opening for the warming drawer or storage drawer.

• The gas and electrical supplies to the appliance should be turned off and/or disconnected when the range is being

serviced or repaired.

WARNING

• To avoid risk of death or severe personal injury from electrical shock, disconnect power before working

on/servicing the appliance.

࡙ƟͱɇЭͱ̈ʒθ̈ϑ̧ͱ˙ʒʪɇϩ˵ࡡϑʪЭʪθʪΧʪθϑͱ͝ɇ̷̟̈͝ЇθцࡡͱθΧθͱΧʪθϩцʒɇ͔ɇ˝ʪ˙θͱ͔ѣθʪͱθʪуΧ̷ͱϑ̈ͱ͝ࡡϩЇθ͝ͱ˙˙ϩ˵ʪ˝ɇϑ

supply before working on/servicing the appliance.

IF YOU SMELL GAS:

DO NOT

light a match, candle, or cigarette.

DO NOT

turn on any gas or electric appliances.

DO NOT

touch any electrical switches.

DO NOT

use any type of phone in the building.

5. Clear the room, building, or area of all occupants.
6. Immediately call the gas supplier from a phone outside of the building. Follow the gas supplier’s
instructions.

ߨࢋÃ˙цͱЇʀɇ͝͝ͱϩθʪɇʀ˵ϩ˵ʪ˝ɇϑϑЇΧΧ̷̈ʪθࡡʀɇ̷̷ϩ˵ʪѣθʪʒʪΧɇθϩ͔ʪ͝ϩࢋ

࡙ƟͱɇЭͱ̈ʒθ̈ϑ̧ͱ˙ʒʪɇϩ˵ࡡϑʪЭʪθʪΧʪθϑͱ͝ɇ̷̟̈͝ЇθцࡡͱθΧθͱΧʪθϩцʒɇ͔ɇ˝ʪ˙θͱ͔ѣθʪͱθʪуΧ̷ͱϑ̈ͱ͝ࡡʒͱ͝ͱϩиʪɇθ̷ͱͱϑʪࣗѣϩϩ̈͝˝ࡡ

ͱθ˵ɇ͝˝̈͝˝˝ɇθ͔ʪ͝ϩϑ͝ʪɇθɇ͝ͱΧʪ͝Ѥɇ͔ʪʒЇθ̈͝˝ͱΧʪθɇϩ̈ͱ͝ɇ͝ʒࢥͱθϑʪθӬʀ̈͝˝ϩ˵ʪɇΧΧ̷̈ɇ͝ʀʪࢋ

• When the oven operates, the interior parts will be very hot.

SAMSUNG Electronics assumes no responsibility for any repairs made on our products by anyone other than authorized
service technicians.

Summary of Contents for NX60T8111S
































































































Search results

Summary of Contents for NX60T8111S

Reviews:

Related manuals for NX60T8111S

Brands by name

Popular brands

Samsung NX60T8111S, Service Manual

Search results

Summary of Contents for NX60T8111S

Reviews:

Related manuals for NX60T8111S

Brands by name

Popular brands