English - 21
03
INS
TALLA
TION
REQUIREMENT
S
TO AVOID BREAKAgE
CAUTION :
Please
DO NOT
push the
unit strongly when you install. These ac-
tions can cause the damage to the unit.
Please
DO NOT
grasp the knob
and push when you install.
(Grasp the L/R door area to push
the unit.)
CAUTION
CAUTION
Do NOT lift or handle the unit by the cooktop frame.
Fig. 1
C1
C2
C3
C4
1.
The counter top around the cut-out should be flat and leveled (see hatched
area on Fig. 1).
2.
Before installing the unit, measure the heights of the two cabinet sides
(C1~C4), front and back (See Fig. 1) from the floor to the top of the counter.
3.
Level the range using the four leveling legs so that the height from the floor
to the underside of the cooktop frame is greater than the tallest cabinet
measurement
by at least 1/16"
.
4.
Slide the unit into the cabinet (
DO NOT PUSH THE UNIT HARD
). Make
sure the center of the unit aligns with the center of the cabinet cut-out.
Summary of Contents for NX58H9500W Series
