Samsung NV70F37 Series, User Manual

Page: 301 / 308

English -
21
06 TROUBLESHOOTING & ERROR CODE
troubleshooting & error code
TROUBLESHOOTING
PROBLEM SOLUTION
What should I do if the oven
doesn’t heat up? • The oven may not be switched on. Switch the oven on.
• The clock may not be set. Set the clock.
•
Check to see if the required settings have been applied.
• A household fuse may have blown or a circuit breaker
may has tripped.
Replace the fuses or reset the circuit. If this happens
repeatedly, call an electrician.
What should I do if the oven
doesn’t heat up even after the
function and temperature have
been set? • There may be problems with the internal electrical
connections. Call your local service centre.
What should I do if an error
code appears and the oven
does not heat up?
•
There is a fault in the internal electrical circuit
connection. Call your local service centre.
What should I do if the time
display is blinking? • There has been a power failure. Set the clock.
What should I do if the oven
light doesn’t illuminate? • The oven light is faulty. Call your local service centre.
What should I do if the oven’s
fan is running without having
been set? • After use, the oven’s fan runs until the oven has cooled
down. Call your local service centre if the fan continues
to run after the oven has cooled down.
ERROR CODE
CODE PROBLEM SOLUTION
**
1)
Safety shut off. The oven continues
operating at the set temperature for a
prolonged time. Turn oven off and remove food. Allow
oven to cool before using it again.
**
1)
Key is pressed for over 10 seconds. Call your local SAMSUNG Customer
Care Centre.
**
1)
Divider Missing. Divider use is
incorrect. Insert divider for upper, twin and lower
mode. Remove divider for single mode.
**
1)
An oven error may cause low
performance and problems in safety.
Stop using the oven immediately. Call your local SAMSUNG Customer
Care Centre.
1) ** refers to all numbers.
NV70F3784LB_OL_DG68-00522K-01_EN.indd 21 2014-05-05 �� 5:22:13