English -
16
troubleshooting & error codes
TROUBLESHOOTING
PROBLEM
SOLUTION
What should I do if the oven
doesn’t heat up?
•
The oven may not be switched on. Switch the oven on.
•
The clock may not be set. Set the clock (see section “Time
Setting”).
•
Check to see if the required settings have been applied.
•
A household fuse may have blown or a circuit breaker may
have tripped. Replace the fuses or reset the circuit. If this
happens repeatedly, call an authorised electrician.
What should I do if, even
though the oven function
and temperature have been
set, the oven does not heat
up?
•
There may be problems with the internal electrical
connections. Call your local service centre.
What should I do if an error
code appears and the oven
does not heat up?
•
There is a fault in the internal electrical circuit connection. Call
your local service centre.
What should I do if the time
display is blinking?
•
There was a power failure. Set the clock (see section “Time
Setting”).
What should I do if the oven
light doesn’t illuminate?
•
The oven light is faulty. Replace the oven light bulb (see
section “Bulb Exchange”).
What should I do if the
oven’s fan is running
without having been set?
•
Following use, the oven’s fan runs until the oven has cooled
down. Call your local service centre if the fan continues to
run after the oven has cooled down.
ERROR CODES
CODE
PROBLEM
SOLUTION
An error of the oven may cause low
performance and problems in safety.
Stop using the oven immediately.
Call local SAMSUNG service centre.
SAFETY SHUTOFF
Oven has continued operating at set
temperature for prolonged time.
Turn oven off and remove food.
Allow oven to cool before using again.
If you did not select an appropriate
temperature for the mode.
Select the correct temperature for the
mode. (see section “Using the fast
preheating mode”)
1) * refers to all numbers or characters.
NV70F35-NV66F35 Series_EG_DG68-00522Q_EN.indd 16
2013-10-08 �� 2:33:02
