86
- This Document can not be used without Samsung's authorization -
Ⅴ
. ADJUSTMENT
C. Log File Analysis
After completing the adjustment, an adjustment result log file should have been created in the SD memory
card.
Open the log file with Notepad and determine whether it is Good or Bad.
3. Run the touchpad adjustment script.
The following screen appears.
4. Touch button R1 (the bottom leftmost button)
5. If the input value over the Push Threshold exceeds N,
the icon will change from white to blue and the next icon
is displayed.
6. The average data for 13 buttons according to the procedures above is read.
7. The Push Threshold is adjusted on the basis of the average number of changes for the buttons.
8. A log file is created and the figures for change and checksum determined are saved in the Flash ROM.
9. The DSC reads the value saved in the Flash ROM when it starts, and uses the value as the Push
Threshold. If the checksum is incorrect or the Push Threshold is not adjusted, the Push Threshold will be
set with the slide button default value.
