Samsung NV100HD, Service Manual

Page: 24 / 127

24 - This Document can not be used without Samsung's authorization -
. INSTALLATION
2. USB : FAQ
Please check the following if the USB connection malfunctions.
Case 1
USB cable is not connected or it is not the supplied USB cable.
Connect the supplied USB cable.
Case 2
The camera is not recognised by your PC. Sometimes, the camera may appear under
[Unknown Devices] in Device Manager.
Install the camera driver correctly. Turn off the camera, remove the USB cable,
plug in the USB cable again, and then turn on the camera.
Case 3
There is an unexpected error during fi le transfer.
Turn the camera power off and on again. Transfer the fi le again.
Case 4
When using the USB hub?
There may be a problem in connecting the camera to the PC through the USB
hub if the PC and the hub are not compatible. Wherever possible, connect the
camera to the PC directly.
Case 5
Are other USB cables connected to the PC?
The camera may malfunction when it is connected to the PC at the same time
as another USB cable. In this case, disconnect the other USB cable, and
connect only one USB cable to the camera.