- 121 -
The problem
Try this!
The
Broadcasting
function
has been deactivated.
Broadcasting
is only available when the
Source
is set to
TV
.
Broadcasting
cannot be accessed while you watch TV using a cable box or satellite box.
Broadcasting
cannot be accessed while a recording is in progress or the Timeshift function
is running.
PIP is not available.
PIP is available only when an external device is connected with an HDMI or Component
cable.
Note that the function is unavailable when Smart Hub is active.
"
This function may not be supported depending on the model or geographical area.
The settings are lost after
5 minutes or every time the
TV is turned off.
If
Usage Mode
is set to
Retail Mode
, the TV's audio and video settings are automatically
reset every 5 minutes.
Change
Usage Mode
to
Home Mode
.
●
Settings
General
System Manager
Usage Mode
A POP (TV’s internal banner
ad) appears on the screen.
Change
Usage Mode
to
Home Mode
.
●
Settings
General
System Manager
Usage Mode
The TV is making a popping
noise.
The expansion and contraction of the TV's outer casing may cause a popping noise.
This does not indicate a product malfunction.
The TV is safe to use.
The TV is making a
humming noise.
Your TV utilizes high-speed switching circuits and high levels of electrical current.
Depending on the TV's brightness level, the TV may seem slightly noisier than a
conventional TV.
Your TV has undergone strict quality control procedures that meet our demanding
performance and reliability requirements.
Some noise coming from the TV is considered normal and is not an acceptable cause for an
exchange or refund.
The software update over
the Internet has failed.
Check the network connection status.
●
Settings
General
Network
Network Status
If the TV is not connected to a network, connect it to a network.
The upgrade stops if you already have the latest software version.
