12 English
Installation instructions
Ins
tallation ins
truc
tions
3-Wire Cable from Home Power Supply - U.S. Only
IMPORTANT:
Use the 3-wire cable from home power supply where local codes
permit a 3-wire connection.
A
E
B
G
H
I
C
D
F
A.
Cable from home power
supply
B.
Junction box
C.
Black wires (normally L1)
D.
White wires (normally
N-neutral)
E.
green wires (normally
G-ground)
F.
4-wire flexible conduit from
oven
G.
Red wires (normally L2)
H.
UL listed wire connectors
I.
UL listed or CSA approved
conduit connector
1.
Connect the 2 black wires (C) together
using a UL listed wire connector.
2.
Connect the 2 white wires (D) and
the green (or bare) ground wire (of
the oven cable) using a UL listed wire
connector.
3.
Connect the 2 red wires (G) together
using a UL listed wire connector.
4.
Install junction box cover.
Install oven
Handle
1.
Using 2 or more people, lift the oven
partially into the cabinet cutout. Use
the handle as shown below.
NOTE
Carefully push against front oven frame.
2.
Push against the seal area of the front
frame to push the oven into the cabinet
until the back surface of the front frame
touches the front wall of the cabinet.
CAUTION
Only push the lower oven. Do not push the
upper oven. (To prevent radio frequency
leakage.)
Install_NQ5300R_NQ70R5511DG_AA_DG68-01149A-04_EN.indd 12
11/11/2019 6:07:32 PM
