Samsung NP550P7C User Manual Download

Page: 62 / 138

Chapter 3.

Using the computer

Using SoundAlive (Optional)

The SoundAlive function enables you to experience more

stereophonic sound using stereo speakers.

SoundAlive is only supported in Windows 8.

•

The software programs provider may vary, depending on

•

your computer model.
In addition, some pictures may differ from actual product

•

depending on the computer model and software version.

Right-click over the

Volume

in the taskbar on the Desktop

and click

Play Device

(Alternatively, click the

Charms menu

on the

Desktop >

Settings

áᔪ

Ŗᮁ

᜽᯲

ᰆ⊹

ᖅᱶ

> Control Panel > Hardware and Sound >

Sound

Right-click over the

Speakers

and select

Properties

Select the

SoundAlive

tab and select one of the modes.

Adjusting the Volume

Summary of Contents for NP550P7C











































































































































Search results

Summary of Contents for NP550P7C

Reviews:

Related manuals for NP550P7C

Brands by name

Popular brands

Samsung NP550P7C, User Manual

Search results

Summary of Contents for NP550P7C

Reviews:

Related manuals for NP550P7C

Brands by name

Popular brands