Samsung NP-RV520I User Manual Download Page 61

Page: 61 / 133

Chapter 3.

Using the computer

Using SoundAlive (Optional)

The SoundAlive function enables you to experience more

stereophonic sound using stereo speakers.

SoundAlive is only supported in Windows 8.

•

The software programs provider may vary, depending on

•

your computer model.
In addition, some pictures may differ from actual product

•

depending on the computer model and software version.

Right-click over the

Volume

in the taskbar on the Desktop

and click

Play Device

(Alternatively, click the

Charms menu

on the

Desktop >

Settings

áᔪ

Ŗᮁ

᜽᯲

ᰆ⊹

ᖅᱶ

> Control Panel > Hardware and Sound >

Sound

Right-click over the

Speakers

and select

Properties

Select the

SoundAlive

tab and select one of the modes.

Adjusting the Volume

Summary of Contents for NP-RV520I






































































































































Search results

Summary of Contents for NP-RV520I

Reviews:

Related manuals for NP-RV520I

Brands by name

Popular brands

Samsung NP-RV520I, User Manual

Search results

Summary of Contents for NP-RV520I

Reviews:

Related manuals for NP-RV520I

Brands by name

Popular brands