Samsung NP-R518 (FreeDos) User Manual Download

Page: 71 / 88

To view on the battery

Separate the battery and press the

PUSH

button inside the battery. The remaining

battery charge (%) will be displayed.

Battery Warning



You will hear an alarm when

the remaining battery charge

reaches below 10%.

In this case, connect the AC

adapter or turn off the computer

and install a fully charged

battery.



If the battery residual amount

is 3~5%, the computer

automatically shuts down after

saving the data. The battery

residual amount may vary

depending on the computer

model.

Battery Usage Time Information

A battery is an expendable supply, so when

using it over a long time, the capacity/battery

life is shortened. If the battery life is reduced

to under half of its initial time, we recommend

purchasing a new battery.
For long periods of not using the battery,

keep the battery after discharging it. This

extends the battery life time.

Extending the Battery Usage

Time

Decreasing the LCD Brightness

Press the

+ (

) keys on the keyboard

to decrease the LCD brightness to extend the

battery usage time.

You can only use this function after

installing Windows XP or Windows

Vista and installing the

Easy

Display Manager

program with the

ystem software media disk

.(Only

for Widows Vista)

Using the Battery Calibration

Function

When charging/discharging the battery

repeatedly for a short time only, the battery

usage time may be reduced by the difference

between the actual battery charge and the

remaining charge display.
In this case, the actual battery charge and

the remaining charge display will be the

same by discharging the battery completely

using the Battery Calibration function, and

then recharging it again.

Disconnect the AC power adapter after

turning off the computer.

Restart your computer and press the

button when the Samsung logo

appears, to start the BIOS Setup.

Bonn_R518_Dos_Eng.indb 73

2009-03-25 오후 1:31:09

Summary of Contents for NP-R518 (FreeDos)

























































































Search results

Summary of Contents for NP-R518 (FreeDos)

Reviews:

Related manuals for NP-R518 (FreeDos)

Brands by name

Popular brands

Samsung NP-R518 (FreeDos), User Manual

Search results

Summary of Contents for NP-R518 (FreeDos)

Reviews:

Related manuals for NP-R518 (FreeDos)

Brands by name

Popular brands