Samsung NP-R40, Manual

Page: 117 / 148

5- 15
5. Troubleshooting
◆
Windows / Screen Related Problems
25. The computer hangs while running a program.
→
If the running program causes an error:
In Windows XP, press the <Ctrl>, <Alt> and <Del> key combination, select the application
program and click on End Task in the Applications tab of the [Windows Task Manager] window.
In Windows 2000, press the <Ctrl>, <Alt> and <Del> key combination, select the application
program or an application that does not respond and click on End Task in the [End Program]
window.
→
If Windows does not respond, restart the computer. Restart the computer by pressing the Power
button.
* No picture is displayed on the external monitor.
→
Press the Switch LCD/CRT Monitor function key and check if the screen output is output to
another display device.
→
Check if the hardware is out of order referring to the descriptions in the LCD related section of
the Hardware Troubleshooting.
◆
CD/DVD-ROM Related Troubles
26. A disc is not recognized or read.
→
Check if the ODD module and the main board are properly connected with the 50 pin connector.
→
Replace the ODD or Main board, if they have some defection.
◆
Power-Saving Mode Related Troubles
27. Connecting a USB device to the computer in standby mode.
→
If a USB device is connected to the computer in standby mode, the screen may be abnormally
displayed.
You have to connect a USB device when the computer is operating normally.
28. A USB device is not working normally when the computer returns from standby mode.
→
In this case, separate and reconnect the USB device.
29. The picture is displayed abnormally when the computer running the Command Prompt (MS-DOS)
enters standby mode and then returns from standby mode.
→
Press the <Alt> and <Tab> key combination to display the picture on the screen.
- This document cannot be used without the authorization of Samsung -