Samsung NP-N100 User Manual Download

Page: 67 / 95

Chapter 3

Settings and Upgrade

Battery

Move to the

Boot > Smart Battery Calibration

item using

the direction keys and press <

Enter

XXXXXXXX

Highlight

Yes

in the

Battery Calibration Confirmation

window and press <

Enter

The Battery Calibration function is activated and the battery

is forcefully discharged. To stop the operation, press the

Esc

> button.

This operation requires 3~5 hours depending on the battery

capacity and the remaining battery charge.

Installing/Removing the Battery

Shutdown the system, close the LCD panel and place the

computer upside down on a flat surface.

Slide the battery latches

outwards

and separate the

battery.

To install the battery again, slide the battery into the system.

The battery latches move inwards and fix the battery

automatically.

Check if the battery latch has been moved inwards.

Summary of Contents for NP-N100
































































































Search results

Summary of Contents for NP-N100

Reviews:

Related manuals for NP-N100

Brands by name

Popular brands

Samsung NP-N100, User Manual

Search results

Summary of Contents for NP-N100

Reviews:

Related manuals for NP-N100

Brands by name

Popular brands