Samsung NP-N100 User Manual Download

Page: 5 / 95

Chapter 1

Getting Started

Before You Start

Copyright

Samsung Electronics Co., Ltd. owns the copyright of this manual.
No part of this manual may be reproduced or transmitted in any

form or by any means, electronic or mechanical, without the

consent of Samsung Electronics Co., Ltd.
The information in this document is subject to change without

notice due to improving the performance of the product.
Samsung Electronics shall not be liable for any data loss. Please

take care to avoid losing any important data and backup your data

to prevent any such data loss.

Precautions for Operating System Support

If a problem occurs because of the reinstallation of other

operating systems(OS) or a previous version of a OS pre-installed

on this computer, or a software that does not support the OS, the

company will not provide technical support, a replacement or

refund, and if our service engineer visits you due to this problem,

a service charge will be applied.

Performance Restrictions

Online games and some games(3D,2D) may not be supported

and Full HD video and some high bit rate HD video playback

may be slow and stutter on this computer.

There is one memory slot provided on this computer. It

supports 2GB memory max. To upgrade to 2GB memory,

replace the current memory with a 2GB memory module.

Summary of Contents for NP-N100
































































































Search results

Summary of Contents for NP-N100

Reviews:

Related manuals for NP-N100

Brands by name

Popular brands

Samsung NP-N100, User Manual

Search results

Summary of Contents for NP-N100

Reviews:

Related manuals for NP-N100

Brands by name

Popular brands