Samsung NM40 User Manual Download Page 38

Page: 38 / 135

Using the Computer 25

If you remove the CD when the CD access LED is on, the disk and the data in
it may be damaged.

Emergency Eject Hole

To eject a CD when the CD drive is not working or the computer is turned off,
unfold a paperclip, and insert the unfolded end of the clip into the emergency
eject hole (located next to the eject button) and press until the CD tray opens.

To clean a CD or DVD title

Clean the disc with a soft clean cloth by wiping from the center outwards.

To play a DVD

You have to install the DVD software provided on a separate CD to view a
DVD title.

To use the Windows Media Player

The Windows Media Player allows you to play audio and video files from the computer
or the Internet.

To launch the Windows Media Player, click

Start > All Programs > Accessories >

Entertainment > Windows Media Player

Features

Playback Control Area

Playlist

Summary of Contents for NM40








































































































































Search results

Summary of Contents for NM40

Reviews:

Related manuals for NM40

Brands by name

Popular brands

Samsung NM40, User Manual

Search results

Summary of Contents for NM40

Reviews:

Related manuals for NM40

Brands by name

Popular brands