2
English
APPROVED FOR RESIDENTIAL APPLIANCES
FOR RESIDENTIAL USE ONLY
READ AND SAVE THESE INSTRUCTIONS
PLEASE READ ENTIRE INSTALLATION GUIDE BEFORE PROCEEDING.
INSTALLATION MUST COMPLY WITH ALL LOCAL CODES.
IMPORTANT:
Save these Instructions for the Local Electrical
Inspector’s use.
INSTALLER:
Please leave these Instructions with this unit for
the owner.
OWNER:
Please retain these instructions for future
reference.
Important Safety Instructions
WARNING
Turn off power circuit at service panel and lock out panel before installing
this kit to the appliance.
Installation must comply with all local codes.
CAUTION
Remove the carton carefully. Wear gloves to protect against sharp edges.
NOTE:
The maximum BTUs if you use carbon filter is 46 000. If you use
the hood with the carbon filters on and it does not decrease the BTUs the
engine can fail or generate an unsafe act.
Installation
Tools and Parts
Part
Qty
Charcoal FIlter
2
Charcoal filter
In the reciruclating mode, the air will be recirculated through disposable
charcoal filters that help remove smoke and odors.
•
Remove the grease filter of the hood.
•
Cover the grill that protects the suction motor with the carbon filter so
that the slots on the filter correspond to the pins on the sides of the
motor protection grill.
•
Turn the carbon filter clockwise to block them (bayonet fixing).
NOTE:
The charcoal filters cannot be cleaned. It should be replaced
every 4-6 months (depending on hood usage).
