Samsung NE63T8751/AA, User Manual

Page: 64 / 74

64 English
Tr
ouble
shoo
ting
Troubleshooting
Problem Possible cause Solution
Brown streaks or
specks. Boilovers have been cooked
onto the surface. • Wait until the surface
cools down. Then,
use a single-edge
razor-blade scraper at
approximately a 45°
angle against the glass
surface to remove the
soil.
• See the section on the
care and cleaning of
the glass cooktop on
page
59 .
Areas of
discoloration with
metallic sheen. Mineral deposits from
water and food have been
left on the surface of the
cooktop. • Remove using a
ceramic-glass cooktop
cleaning cream.
• Use cookware with
clean, dry bottoms.
Clean the cooktop with
a ceramic cleaning
agent regularly every
week.
"Cracking" or
"popping" sound. This is the sound of the
metal heating and cooling
during both the cooking
and self-cleaning functions. This is normal operation,
and not a system failure.
Use the range as usual.
Problem Possible cause Solution
The surface unit
frequently cycles
on and off. The element will cycle on
and off to maintain the
power setting. This is normal operation,
and not a system failure.
Use the range as usual.
The surface unit
stops glowing when
changed to a lower
setting. This is normal. The unit is still on and hot.
Scratches or
abrasions on the
cooktop surface. The cooktop is being
cleaned improperly. Scratches are not
removable. Tiny scratches
will become less visible in
time as a result of cleaning.
Use ceramic glass top
cleaning cream. Do not
use chemical or corrosive
agents. These agents may
damage the surface of the
product.
Cookware with rough
bottoms was used on the
cooktop or there were
coarse particles (e.g., salt or
sand) present between the
cookware and the surface
of the cooktop. To avoid scratches, follow
the recommended cleaning
procedures. Make sure
cookware bottoms are
clean before use, and use
cookware with smooth
bottoms.
Cookware has been slid
across the cooktop surface.