40 English
Maint
aining y
our applianc
e
Maintaining your appliance
Removing and replacing the oven door
How to remove the door
CAUTION
•
The door is very heavy. Be careful when removing and lifting the door.
Do not lift the door by the handle.
•
Turn the power OFF before removing the door.
Hinge lock
Locked position
Unlocked position
1.
Open the door completely.
2.
Pull the hinge locks down toward the door frame to the unlocked position.
about 5°
Fig. 1
3.
Firmly grasp both sides of the door at
the top.
4.
Close the door to the door removal
position, which is approximately
5 degrees from vertical (Fig. 1).
Fig. 2
5.
Lift door up and out until the hinge
arm is clear of the slot (Fig. 2).
How to replace the door
Hinge arm
Bottom
edge of
slot
Indentation
1.
Firmly grasp both sides of the door at the top.
2.
With the door at the same angle as the removal position, slide the indentation
of the hinge arm into the bottom edge of the hinge slot. The notch in the
hinge arm must be fully inserted into the bottom of the slot.
NE59T7511SS_AA_FULL MAMES+CFR.indb 40
2020-04-22 �� 9:50:00
Summary of Contents for NE59T7511SS
