Samsung NC108 User Manual Download

Page: 11 / 80

Do not place heavy objects

or step onto the power

cord or AC adapter to avoid

damaging the power cord or

AC adapter.

If the cord is damaged, there

is a danger of electric shock

or fire.

Connect the power cord to

the AC adapter firmly.

Otherwise, there is a danger

of fire due to an incomplete

contact.

Use only the AC adapter

supplied with the product.

Using another adapter may

cause the screen to flicker.

AC Adapter Usage Precautions

If water or another

substance enters the power

input jack, AC adapter or

the computer, disconnect

the power cord and contact

the service center.

Damage to the device within

the computer may cause

electric shock or fire hazard.

Keep the power cord or

outlet clean so that they are

not covered with dust.

Failing to do so may result

in fire.

Warning

Failing to follow instructions marked with this symbol may cause personal injury and even fatality.

Summary of Contents for NC108

















































































Search results

Summary of Contents for NC108

Reviews:

Related manuals for NC108

Brands by name

Popular brands

Samsung NC108, User Manual

Search results

Summary of Contents for NC108

Reviews:

Related manuals for NC108

Brands by name

Popular brands