Functions
•
If a microphone is connected to the product
and you press the USB REC button, you
activate the MP3 Recording function, not
the Copy function.
•
Press the USB REC button for a second
to start FILE COPY. Press and hold the
USB REC button for a few seconds to start
FOLDER COPY.
External Source
•
“AUX RECORD” is displayed and recording
starts.
CD/USB1(MP3) & MIC
•
“MP3 RECORD” is displayed and recording
starts.
4.
To stop recording, press the
5
button. The
recording is automatically saved as an MP3
file.
5.
After the recording is finished, a directory
named “RECORDING”(CD-DA), “COPY”(CD-
ROM/ USB), “TUNER RECORDING”, “AUX
RECORDING” or “MP3 RECORDING” is
created in your device.
|
NOTES
|
✎
WMA/MP2 files can only be copied not
recorded.
✎
Do not disconnect the USB device or the AC
Cord during recording. You can cause file
damage.
✎
If you disconnected the USB device during
recording, the product will turn off and you
will not be able to delete the file that has been
recorded. If this occurs, connect the USB
device to a PC, back up the USB data to the
PC, and then reformat the USB device.
✎
If the USB device does not have enough
memory, “NOT ENOUGH MEMORY” will
appear on the display.
✎
The Recording function supports the FAT file
systems only. The NTFS file system is not
supported.
✎
When you use the CD high speed search
function, the CD recording function is
unavailable.
✎
With some USB devices, recording time may
be longer.
✎
In the Program mode, you can't use the
recording function.
✎
When the Recording function is active, the EQ
and GIGA SOUND functions automatically turn
off and are unavailable.
✎
During a CD recording, the REPEAT function
automatically turns off and is unavailable.
✎
If you use the MIC function during a CD
recording, the voice from the microphone will
be recorded.
✎
You can not record audio from the radio
when searching for a station or if there are no
frequencies available when the product is set
to Tuner mode.
✎
Note that setting the input level too loud when
recording music from an external device
through the AUX or USB channel may introduce
noise into the recording. If this occurs, lower
the external device’s volume level.
Recording Speed
Each time you press the
REC SPEED
button
on the remote control, the recording speed will
change as follows:
RECORD SPEED x 1
;
RECORD SPEED x 4
•
When you record from the tuner or an external
source, you cannot change the recording
speed.
•
If you select RECORD SPEED X 4, sound is not
produced during the recording.
•
If you connect the microphone, you have one
recording speed mode available: RECORD
SPEED X 1.
•
During recording, if you disconnect the
microphone, the recording will stop. If you
reconnect the microphone, the recording will
not restart.
|
NOTES
|
✎
Even when RECORD SPEED x4 is set,
recording may not be made in x4 speed
depending on the used USB storage device.
22
English
[MX-HS9000-SJ,ZN]AH68-02687H-03ENG.indd 22
2014-05-27 오전 11:41:44
