ENG - 5
ECHO
You can give an echo effect to the sound from a connected microphone
(MIC)
by adjusting
the
ECHO
knob.
If you turn clockwise, the echo effect goes up, and if you turn counter-clockwise, the echo
effect goes down.
VOL
Use the
VOL
knob to adjust the volume of a connected microphone
(MIC)
.
If you turn clockwise, the volume goes up, and if you turn counter-clockwise, the volume
goes down.
MIC
Connect your microphone to the
MIC
jack.
GROUP
PLAY OUT
Terminals
Use an Audio Cable (not supplied) to connect
GROUP PLAY (OUT)
terminals on the main
unit to Audio In on an external analogue output device.
•
Be sure to match connector colours.
•
If the external analogue output device has only one Audio In jack, connect either left or
right.
AUX2/
GROUP
PLAY IN
Terminals
Use an Audio Cable (not supplied) to connect
AUX2 (IN)
terminals on the main unit to
Audio Out on an external analogue output device.
•
Be sure to match connector colours.
•
If the external analogue output device has only one Audio Out jack, connect either left
or right.
•
Press the
(Source)
button to select
AUX2
.
•
If the product is in
AUX2
mode with no playback and no command input for more than
20 minutes, the system will turn off.
•
If the product is in
AUX2
mode with playback for more than 8 hours and no command
input, the system will turn off.
AUX1
Use an Audio (AUX) Cable (not supplied) to connect
AUX1
jack on the main unit to Audio
Out on an external device.
•
If the product is in
AUX1
mode with no playback and no command input for more than
20 minutes, the system will turn off.
•
If the product is in
AUX1
mode with playback for more than 8 hours and no command
input, the system will turn off.
Power
Connect the power cord to the
Power
jack and connect the other end of the power cord to
a wall socket to supply electrical power to the Party Audio.
